Mount securing the upper cleaner to the aquarium glass

Wall Mount

Medium or large fish and turtles can sometimes bump the upper part of the cleaner and cause it to tip over.

This mount was developed to help prevent that.

Buy on Amazon US
Transparent wall mount secured with a compression suction cup

Strong Compression Suction Mount

The compression suction cup attaches firmly to the aquarium glass and supports the upper part of the cleaner.

It helps prevent the cleaner from tipping over when bumped by medium or large fish and turtles.

Mount components: suction cup, cover plate, mount and compression nut

Included Components

  1. Suction Cup
  2. Cover Plate
  3. Mount
  4. Compression Nut

Installation

Press the suction cup into place at the desired location.
Place the cover plate over the cup, fit the mount, and tighten the compression nut to secure it.
The compression force depends on how tightly the nut is fastened.

  1. Step 1: press the suction cup onto the glass

    1. Attach the suction cup

    Press the suction cup onto the aquarium glass at the desired position.

  2. Step 2: fit the cover plate over the suction cup

    2. Fit the cover plate

    Place the cover plate over the attached suction cup.

  3. Step 3: fit the mount over the cover plate

    3. Fit the mount

    Fit the mount over the cover plate.

  4. Step 4: tighten the compression nut to secure the mount

    4. Tighten the nut

    Tighten the compression nut to secure the mount.

Care and Handling
Remove any protective film from the acrylic parts before use. Handle gently: excessive force during assembly or impact may crack or break the parts.